AlcoForce EVO electrochemical breathalyzer
is an AlcoForce standard tester. The breathalyzer has a precise sensor
electrochemical system, which makes it very reliable and economical in
use. Elegant design, backlit, positioned LCD display
and intuitive operation makes the comfortable and easy to use. Tester
has one function button, so the service is intuitive.
It's a good place to be. electrochemical breathalyzer EVO is 0.06? (conditions
measurement in the technical data). The breathalyzer is ready to go after a few
seconds, and the preparation time depends on the amount of alcohol in the exhaled
during the previous measurement. After performing the test on the display
appears si? the result of the measurement, and in the event that the alcohol consumption is
or higher than the threshold, i.e. 0.20. the display changes color
red, and the breathalyzer emits a pi? a short signal. In
to draw additional attention to the user. Of course,
going abroad. e.g. to a country where there is a 0.50%
can be switched. the breathalyzer alarm to the appropriate value (without
service). The EVO has a built-in meter, i.e. ? e after every
measurement, it is added to the number of tests performed. Counter
performed test is an important feature, because it is after 500 measurements?in breathalyzer
should be calibral. Calibration? is made to make a return to the the right point
sensor and the right breathalyzer indications. The sensor's operating point is
after the measurement has been made, but it also does not May? Na
weather conditions such as temperature, humidity and humidity. and the conditions
Stores. Therefore, if we do not perform 500 tests, the manufacturer recommends
check the breathalyzer after 6 months, and not less often than once a year
calibration. The tester is powered only by one? batteries? AAA and
available in three colours: silver, blue and grey. Dedicated
personal use or for self-control of professional drivers.
Technical data
* sensor type: electrochemical
* measuring range: 0.00 ? 3,00?
* to be a good place to be. +/- 0.06? BAC for 0.5? at 25? C
* to be a good place to be. presented result: 0.01?
* requires mouthpiece: yes
* sensor control system: yes
* air flow control system: yes
* meter measurement?w: yes
* sound signalling: yes
* HIGH BAC alarm: yes
* calibration alarm: yes, sound
* you can sensor replacement: yes by service
* Power supply: 1 x AAA 1.5V alkaline
* dimensions (width/high/g?): 55 x 105 x 23mm
* weight: 75 g
The payment will be accepted online by the Oziway Marketplace on behalf of the Seller of this offer.
No questions yet. Be the first to ask the question!
Loading...